# Apollo MTR-1 with the follow-me stair light: the firmware the browser
# installer flashes (installer/index.html, published to GitHub Pages by
# .github/workflows/installer.yml on every version tag).
#
# Same as example/apollo-mtr-1.yaml without Wi-Fi credentials. After flashing,
# the installer page asks for Wi-Fi over USB (Improv serial). Without it, the
# sensor opens the "Apollo MTR1 Hotspot" access point with a captive portal.
# Improv over Bluetooth is left out: it raises flash use from 69% to 91%.

substitutions:
  name: apollo-mtr-1
  version: "26.3.2.1"            # Apollo's MTR-1 release, shown as its firmware version
  follow_me_version: "dev"        # set by the installer workflow from the tag
  follow_me_dir: ../firmware

esphome:
  name: "${name}"
  friendly_name: Apollo MTR-1
  comment: Apollo MTR-1 with follow-me-stairs
  name_add_mac_suffix: true
  project:
    name: "follow-me-stairs.apollo-mtr-1"
    version: "${follow_me_version}"
  min_version: 2026.8.2
  on_boot:
    - priority: 500
      then:
        - text_sensor.template.publish:
            id: apollo_firmware_version
            state: "${version}"
    - priority: -10
      then:
        - if:
            condition:
              - lambda: "return id(runTest);"
            then:
              - lambda: "id(testScript).execute();"

logger:

ota:
  - platform: esphome
    id: ota_default

wifi:
  power_save_mode: none
  ap:
    ssid: "Apollo MTR1 Hotspot"

improv_serial:

captive_portal:

packages:
  core: github://ApolloAutomation/MTR-1/Integrations/ESPHome/Core.yaml@26.3.2.1
  follow_me: !include ../firmware/follow-me.yaml